Special Summer Sale Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: pass65

5V0-41.20 VMware SD-WAN Troubleshoot Questions and Answers

Questions 4

Scenario 2:

After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.

Exhibit.

5V0-41.20 Question 4

The tunnel from spoke to hub is not coming up. What are the two possible reasons? (Choose two.)

Options:

A.

Spoke Edge and hub Edge are two different Edge models.

B.

Spoke Edge and hub Edge have a mismatch certificate authentication mode.

C.

Hub WAN Interface might be behind the NAT Device or firewall.

D.

Dynamic Branch to Branch is not enabled.

Buy Now
Questions 5

Scenario 3:

After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.

Exhibit.

5V0-41.20 Question 5

A network engineer is configuring an Internet Backhaul Policy for the Chicago Branch to utilize NY's hub as a much better source for Internet for certain SaaS applications. For an unknown reason, the network engineer is not able to select the hubs in the Internet Backhaul Policy.

What could be the reason?

Options:

A.

The Dynamic Branch to Branch has not been enabled.

B.

The hub is not configured with the proper IP address.

C.

Dynamic Branch to Branch using gateways has not been enabled.

D.

The Edge's profile does not include Backhaul hubs as an option.

Buy Now
Questions 6

Scenario 3:

After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected lo. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.

Exhibit.

5V0-41.20 Question 6

Users are complaining that web pages to certain web sites are very slow to load and at times unresponsive. The network administrator has verified that the traffic is going correctly out the underlay.

What should the administrator check next?

Options:

A.

Verify if Path-MTU Discovery is disabled.

B.

Verify if there is latency, loss, or jitter on the underlay.

C.

Verify the Business Policy flows are matching.

D.

Verify if routes to Gateways are present in the Overlay Flow Control (OFC).

Buy Now
Questions 7

Scenario 2:

After completing the branch activation activities for all required branches, the administrator attempts to test connectivity between the various branches and between the hubs and branches- The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.

Exhibit.

5V0-41.20 Question 7

The tunnel from the Dallas site to the Seattle hub is not coming up.

What are two things that should be checked to determine the issue? (Choose two.)

Options:

A.

Hub WAN Interface might be behind a firewall.

B.

Spoke Edge and Hub Edge have a mismatched certificate.

C.

Dynamic Branch to Branch is not enabled.

D.

Spoke Edge and Hub Edge are two different Edge models.

Buy Now
Questions 8

Scenario 3:

After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present- The network administrator is informed (hat during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.

Exhibit.

5V0-41.20 Question 8

Which metrics can a network administrator verify in the QoE screen to determine the overall health of Underlay and Overlay?

Options:

A.

Jitter Packet Loss, Speed.

B.

Jitter, Packet Loss, Latency.

C.

Jitter, Speed, Latency.

D.

Packet Loss, Latency, Speed.

Buy Now
Questions 9

Scenario 2:

After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.

Exhibit.

5V0-41.20 Question 9

A network administrator is trying to create multiple overlays on a single physical interface on an Edge. The administrator is able to bring up only a single overlay so far, but is having trouble with bringing up additional overlays.

What could be the possible reason?

Options:

A.

The administrator does not have the right permission to create multiple overlays. The administrator needs to have an Operator-level privilege for this task.

B.

On the WAN overlay configuration, verify the IP address, next-hop, and the VLAN ID configuration.

C.

The licensing does not support multiple overlays on a single physical interface.

D.

Multiple overlays cannot be created on a single physical interface. Multiple physical interfaces are needed.

Buy Now
Questions 10

Scenario 2:

After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.

Exhibit.

5V0-41.20 Question 10

Users at the London site are complaining of various intermittent issues around websites not loading, or applications being remotely accessed disconnecting sporadically and reconnecting after a few minutes. The network administrator does not see anything strange on the Edge overview page and decides to check if the CPU or memory have been hitting close to 100°/o.

Where should the administrator verify this information?

Options:

A.

In the VCO > Test 8c Troubleshoot > Remote Diagnostics > System Status

B.

In the VCO > Monitor > Click London_Site01 > Click the System Tab

C.

In the VCO > Remote Troubleshooting > Remote Actions > System Status

D.

In the VCO > Monitor > Alerts

Buy Now
Exam Code: 5V0-41.20
Exam Name: VMware SD-WAN Troubleshoot
Last Update: Mar 28, 2025
Questions: 36

PDF + Testing Engine

$57.75  $164.99

Testing Engine

$43.75  $124.99
buy now 5V0-41.20 testing engine

PDF (Q&A)

$36.75  $104.99
buy now 5V0-41.20 pdf