A10-System-Administration A10 Certified Professional System Administration 4 Questions and Answers

To serve as a tie-breaker when selecting a VRRP-A owner.

To provide a single next hop IP address for uplink and downlink devices.

To use as source IP address for VRRP-A hellos.

To provide a single IP to manage all VRRP-A devices in the set.

Device 2

Device 1

VCS will randomly assign the VRID to a device based on the uptime of the device.

Device 3

The VRID will be hosted on all three devices at the same time.

System logs generated from partition “p1” will be sent to logging server “2.2.2.2”, and only warning severity log messages are sent to the shared logging server’s “192.168.216.45”.

System logs generated from partition “p1” will be sent to logging server “2.2.2.2”, as well as to the shared logging server’s “192.168.216.45”.

System logs generated from partition “p1” will be sent to logging server “2.2.2.2”.

System logs generated from partition “p1” will be sent to the shared logging server’s “192.168.216.45”.

Reboot is performed on vMaster and reload operation on vBlades.

All devices in the chassis are rebooted.

Reboot is performed on vMaster.

Reboot is performed only on vBlades.

2

VRID Default is enough

6

5

3

4

Verify the interface is untagged on each device.

Enable management service ssh on that interface for each device.

Configure vcs floating-ip on network 3.0.0.0 /24.

Apply acl ”permit 3.0.0.0 /24” on that interface for each device.