HQT-4420 Hitachi Vantara Qualified Professional - Content Platform Installation Questions and Answers

To upgrade a four-node HCP G10 cluster to an eight-node cluster, the customer can use additionalG10orG11node models. The HCP platform supports the addition of both G10 and G11 nodes in the same cluster, as they are compatible with each other in terms of architecture, management, and functionality. This allows the cluster to be scaled up by adding more nodes of either model to meet growing storage and performance needs.

Hitachi Vantara Content Platform Installation References:

When expanding an HCP G10 cluster, it is crucial to use node models that are supported and compatible with the existing cluster configuration, such as G10 and G11.

The maximum number of drives supported in one HCP S10 enclosure is 60. The S10 enclosure is designed to accommodate a large number of drives to provide significant storage capacity in a relatively compact form factor. This drive density is essential for scaling storage in environments that require large data volumes. This configuration is detailed in the "HCP S10 Hardware Configuration Guide," which outlines the specifications and capacities of the S10 enclosures.

When replacing an entire HCP G10 node, it is necessary to check the BIOS configuration. This ensures that the new hardware is correctly configured according to the required specifications for the HCP system. The BIOS settings need to be consistent with the rest of the cluster nodes to ensure proper functionality, performance optimization, and hardware compatibility. This check might include verifying boot order, enabling virtualization, setting appropriate hardware clock configurations, and other critical settings outlined in the "Hitachi Vantara HCP G10 Installation and Configuration Guide."QUESTION NO: 4

You are installing a HCP G10 with attached storage. The system will be networked using four 10 GbE SFP+ interfaces.

How many PCIe cards are installed in each HCP G10 node?

A. 1

B. 2

C. 3

D. 4

Answer:B

Each HCP G10 node with attached storage and networked using four 10 GbE SFP+ interfaces requires two PCIe cards. Typically, one PCIe card is allocated for network connectivity, while the other is used for storage connectivity. The cards need to support the necessary number of network interfaces and any additional connections required for attached storage. The specific configuration depends on the HCP model, but generally, two PCIe cards are sufficient to handle both networking and storage interfaces as described in the "HCP G10 Hardware Installation Guide."

To configure host group security on a new HCP G10 with attached storage, the World Wide Port Name (WWPN) is required. The WWPN is a unique identifier for each Fibre Channel port in a storage area network (SAN) environment. It is used to configure access control and define which hosts can communicate with specific storage resources. This setting ensures that only authorized hosts can access the storage, enhancing the overall security of the HCP system. This requirement is documented in the "Hitachi Vantara HCP G10 Storage Configuration Guide."

The Data At Rest Encryption (DARE) feature can only be enabled during the initial cluster configuration. This is because DARE involves setting encryption parameters and keys that must be applied uniformly across all nodes in the cluster from the very beginning. Enabling DARE post-deployment could result in inconsistent encryption states and potential data access issues. The "HCP Security and Encryption Configuration Guide" details the process for enabling DARE and emphasizes the need for configuring it at the cluster's initial setup phase.

The two supported speed combinations for the Front-End and Back-End networks of an HCP G11 are:

Front-End 10 GbE SFP+ and Back-End 10 GbE SFP+: This combination is suitable for environments requiring high-speed connectivity on both the front-end (client-facing) and back-end (internal HCP operations).

Front-End 25 GbE SFP+ and Back-End 10 GbE SFP+: This combination provides even faster front-end connectivity while maintaining robust back-end performance, accommodating scenarios where higher bandwidth is needed for external client access or data transfer.

Hitachi Vantara Content Platform Installation References:

The speed combinations align with the network capabilities and configurations supported by the HCP G11 platform, providing flexibility to match organizational needs for both front-end and back-end traffic requirements.

When performing a six-drive upgrade on an HCP G10 with local storage:

RAID level and Virtual Disks will be created automatically (A):This is correct. The system automatically handles the RAID configuration and creation of virtual disks to ensure that the new drives are correctly integrated into the existing storage structure.

The node is online during this procedure (C):This is also correct. The upgrade can be performed while the node remains online, minimizing disruption to the system's operation and ensuring continuous availability. These procedures are documented in the "HCP G10 Maintenance and Upgrade Guide," which outlines the steps for online upgrades and automatic RAID configuration.