Workday Workday-Pro-Integrations Dumps Questions Answers

In Workday integrations, XSLT is used to transform XML data, such as the output from an Enterprise Interface Builder (EIB) or a web service-enabled report, into a desired format for third-party systems. In this scenario, you need to write XSLT to process wd:Dependents_Group elements and output a relationship code based on the value of the wd:Relationship attribute or element. The requirement is tooutput "SP" for a "Spouse" relationship, "CH" for a "Child" relationship, and "OTHER" for any other relationship, using an statement within a template matching wd:Dependents_Group.

Here’s why option C is correct:

XSLT <xsl:choose> Structure: The element in XSLT provides conditional logic similar to a switch statement. It evaluates conditions in elements sequentially, executing the first matching condition, and uses for any case that doesn’t match.

Relationship as an Attribute: Based on the provided XML snippet, wd:Relationship is an attribute (e.g., Spouse within wd:Dependents_Group). However, in Workday XML for integrations, wd:Relationship is often represented as an attribute (@wd:Relationship) rather than a child element, especially in contexts like dependent data in reports. The syntax @wd:Relationship in the test attribute of correctly references this attribute, aligning with Workday’s typical XML structure for such data.

Condition Matching:

The first SP checks if the wd:Relationship attribute equals "Spouse" and outputs "SP" if true.

The second CH checks if the wd:Relationship attribute equals "Child" and outputs "CH" if true.

The OTHER handles all other cases, outputting "OTHER" if the relationship is neither "Spouse" nor "Child."

Context in Template: Since the template matches on wd:Dependents_Group, the test conditions operate on the current wd:Dependents_Group element and its attributes, ensuring the correct relationship code is output for each dependent. The XML snippet shows wd:Relationship as an element, but Workday documentation and integration practices often standardize it as an attribute in XSLT transformations, making @wd:Relationship appropriate.

Why not the other options?

A.

xml

WrapCopy

SP

CH

OTHER

This assumes wd:Relationship is a child element of wd:Dependents_Group, not an attribute. The XML snippet shows wd:Relationship as an element, but in Workday integrations, XSLT often expects attributes for efficiency and consistency, especially in report outputs. Using wd:Relationship without @ would not match the attribute-based structure commonly used, making it incorrect for this context.

B.

xml

WrapCopy

SP

CH

OTHER

This correctly uses @wd:Relationship for an attribute but has a logical flaw: if wd:Relationship='Child', the second would output "CH," but the order of conditions matters. However, the primaryissue is that it doesn’t match the exact structure or intent as clearly as option C, and Workday documentation often specifies exact attribute-based conditions like those in option C.

D.

xml

WrapCopy

SP

CH

OTHER

This uses an absolute path (/wd:Relationship), which searches for a wd:Relationship element at the root of the XML document, not within the current wd:Dependents_Group context. This would not work correctly for processing dependents in the context of the template matching wd:Dependents_Group, making it incorrect.

To implement this in XSLT:

Within your template matching wd:Dependents_Group, you would include the statement from option C to evaluate the wd:Relationship attribute and output the appropriate relationship code ("SP," "CH," or "OTHER") based on its value. This ensures the transformation aligns with Workday’s XML structure and integration requirements for processing dependent data in an EIB or web service-enabled report, even though the provided XML shows wd:Relationship as an element—XSLT transformations often normalize to attributes for consistency.

References:

Workday Pro Integrations Study Guide: Section on "XSLT Transformations for Workday Integrations" – Details the use of , , , and XPath for conditional logic in XSLT, including handling attributes like @wd:Relationship.

Workday EIB and Web Services Guide: Chapter on "XML and XSLT for Report Data" – Explains the structure of Workday XML (e.g., wd:Dependents_Group, @wd:Relationship) and how to use XSLT to transform dependent data, including attribute-based conditions.

Workday Reporting and Analytics Guide: Section on "Web Service-Enabled Reports" – Covers integrating report outputs with XSLT for transformations, including examples of conditional logic for relationship codes.

As an integration developer working with Workday, you are tasked with transforming the output of an Enterprise Interface Builder (EIB) that calls the Get_Job_Profiles web service operation. The provided XML shows the response from this operation, and you need to write XSLT to select the value of the element. The root template of your XSLT matches on and applies a template to . Within this template, you use the element to extract the value. Let’s analyze the XML structure, the requirement, and each option to determine the correct XPath syntax.

Understanding the XML and Requirement

The XML snippet provided is a SOAP response from the Get_Job_Profiles web service operation in Workday, using the namespace xmlns:wd="urn:com.workday/bsvc" and version wd:version="v43.0". Key elements relevant to the question include:

The root element is .

It contains , which includes elements.

Within , there are:

, which contains elements (e.g., a Job_Profile_ID).

, which contains with the value Senior_Benefits_Analyst.

The task is to select the value of (e.g., "Senior_Benefits_Analyst") using XPath within an XSLT template that matches . The element outputs the value of the selected node, so you need the correct XPath path from the context to .

Analysis of Options

Let’s evaluate each option based on the XML structure and XPath syntax rules:

Option A: wd:Job_Profile/wd:Job_Profile_Data/wd:Job_Code

This XPath starts from wd:Job_Profile and navigates to wd:Job_Profile_Data/wd:Job_Code. However, in the XML, is the parent element, and is a direct child containing . The path wd:Job_Profile/wd:Job_Profile_Data/wd:Job_Code is technically correct in terms of structure, as it follows the hierarchy:

→ → .

However, since the template matches , the context node is already . You don’t need to include wd:Job_Profile/ at the beginning of the XPath unless navigating from a higher level. Starting directly with wd:Job_Profile_Data/wd:Job_Code (Option C) is more concise and appropriate for the context. This option is technically valid but redundant and less efficient, making it less preferred compared to Option C.

Option B: wd:Job_Profile_Data[@wd:Job_Code]

This XPath uses an attribute selector ([@wd:Job_Code]) to filter based on an attribute named wd:Job_Code. However, examining the XML, does not have a wd:Job_Code attribute—it has a child element with the value "Senior_Benefits_Analyst." The [@attribute] syntax is used for attributes, not child elements, so this XPath is incorrect. It would not select the value and would likely return no results or an error. This option is invalid.

Option C: wd:Job_Profile_Data/wd:Job_Code

This XPath starts from wd:Job_Profile_Data (a direct child of ) and navigates to wd:Job_Code. Since the template matches , the contextnode is , and wd:Job_Profile_Data/wd:Job_Code correctly points to the element within . This path is:

Concise and appropriate for the context.

Directly selects the value "Senior_Benefits_Analyst" when used with .

Matches the XML structure, as contains as a child.

This is the most straightforward and correct option for selecting the value within the template.

Option D: wd:Job_Profile_Reference/wd:ID[@wd:type='Job_Profile_ID']

This XPath navigates to (a child of ) and then to with an attribute wd:type="Job_Profile_ID". In the XML, contains:

1740d3eca2f2ed9b6174ca7d2ae88c8c

Senior_Benefits_Analyst

The XPath wd:Job_Profile_Reference/wd:ID[@wd:type='Job_Profile_ID'] selects the element with wd:type="Job_Profile_ID", which has the value "Senior_Benefits_Analyst." However, this is not the value—the is a separate element under , not . The question specifically asks for the value, so this option is incorrect, as it selects a different piece of data (the job profile ID, not the job code).

Why Option C is Correct

Option C, wd:Job_Profile_Data/wd:Job_Code, is the correct XPath syntax because:

It starts from the context node (as the template matches this element) and navigates to , which directly selects the element’s value ("Senior_Benefits_Analyst").

It is concise and aligns with standard XPath navigation in XSLT, avoiding unnecessary redundancy (unlike Option A) or incorrect attribute selectors (unlike Option B).

It matches the XML structure, where is a child of and contains as a child.

When used with in the template, it outputs the job code value, fulfilling the requirement.

Practical Example in XSLT

Here’s how this might look in your XSLT:

xml

WrapCopy

This would output "Senior_Benefits_Analyst" for the element in the XML.

Verification with Workday Documentation

The Workday Pro Integrations Study Guide and SOAP API Reference (available via Workday Community) detail the structure of the Get_Job_Profiles response and how to use XPath in XSLT for transformations. The XML structure shows as the container for job profile details, including . The guide emphasizes using relative XPath paths within templates to navigate from the matched element (e.g., ) to child elements like .

Workday Pro Integrations Study Guide References

Section: XSLT Transformations in EIBs– Describes using XSLT to transform web service responses, including selecting elements with XPath.

Section: Workday Web Services– Details the Get_Job_Profiles operation and its XML output structure, including and .

Section: XPath Syntax– Explains how to navigate XML hierarchies in Workday XSLT, using relative paths like wd:Job_Profile_Data/wd:Job_Code from a context.

Workday Community SOAP API Reference – Provides examples of XPath navigation for Workday web service responses.

Option C is the verified answer, as it correctly selects the value using the appropriate XPath syntax within the template context.

In Workday reporting, selecting the appropriatePrimary Business Object (PBO)andRelated Business Objects (RBOs)is critical to ensure that the report retrieves and organizes data correctly based on the requirements. The requirement here is to create a report that outputs one row per worker for a specified supervisory organization, including their active benefit plans and the names and ages of all related dependents. The Worker business object contains fields like Employee, Benefit Plans, and Dependents, while the Dependent business object provides the Name and Age fields for dependents.

Why Worker as the PBO?The report needs to output "one row per worker," making the Worker business object the natural choice for the PBO. In Workday, the PBO defines the primary dataset and determines the granularity of the report (i.e., one row per instance of the PBO). Since the report revolves around workers and their associated data (benefit plans and dependents), Worker is the starting point. Additionally, the requirement specifies a supervisory organization at runtime, which is a filter applied to the Worker business object to limit the population.

Why Dependent as an RBO?The Worker business object includes a "Dependents" field, which is a multi-instance field linking to the Dependent business object. To access detailed dependent data (Name and Age), the Dependent business object must be added as an RBO. This allows the report to pull in the related dependent information for each worker. Without the Dependent RBO, the report could only reference the existence of dependents, not their specific attributes like Name and Age.

Analysis of Benefit Plans:The Worker business object already contains the "Benefit Plans" field, which provides access to active benefit plan data. Since this is a field directly available on the PBO (Worker), no additional RBO is needed to retrieve benefit plan information.

Option Analysis:

A. PBO: Dependent, RBO: Worker: Incorrect. If Dependent were the PBO, the report would output one row per dependent, not one row per worker, which contradicts the requirement. Additionally, Worker as an RBO would unnecessarily complicate accessing worker-level data.

B. PBO: Worker, RBO: Dependent: Correct. This aligns with the requirement: Worker as the PBO ensures one row per worker, and Dependent as the RBO provides access to dependent details (Name and Age). Benefit Plans are already accessible via the Worker PBO.

C. PBO: Dependent, no RBOs: Incorrect.This would result in one row per dependent and would not allow easy access to worker or benefit plan data, failing to meet the "one row per worker" requirement.

D. PBO: Worker, no RBOs: Incorrect. While Worker as the PBO is appropriate, omitting the Dependent RBO prevents the report from retrieving dependent Name and Age fields, which are stored in the Dependent business object, not directly on Worker.

Implementation:

Create a custom report withWorkeras the PBO.

Add a filter for the supervisory organization (specified at runtime) on the Worker PBO.

AddDependentas an RBO to access Name and Age fields.

Include columns from Worker (e.g., Employee, Benefit Plans) and Dependent (e.g., Name, Age).

References from Workday Pro Integrations Study Guide:

Workday Report Writer Fundamentals: Section on "Selecting Primary and Related Business Objects" explains how the PBO determines the report’s row structure and RBOs extend data access to related objects.

Integration System Fundamentals: Discusses how multi-instance fields (e.g., Dependents on Worker) require RBOs to retrieve detailed attributes.